How To Operate An Oxygen Concentrator?

- Feb 16, 2019-

Operation method:
1. Install the main engine as a landing wheel or a hanging rack to hang on the wall outside and install the gas filter;
2. Screw the oxygen supply plug-in plate on the wall or support as needed, and then hang the oxygen supply;
3. Connect the oxygen outlet interface of the oxygen supplier with the oxygen pipe, and connect the 12V power supply line of the oxygen supply to the 12V power supply line of the main unit. If a plurality of oxygen supply devices are connected in series, it is only necessary to add a three-way joint, and the pipeline is fastened with a wire buckle;
4. Plug the host's 220V power cord into the wall socket, and the oxygen supply is lit red;
5. Please add purified water to the designated location in the humidification cup. Then install it on the oxygen outlet of the oxygen supply;
6. Please put the oxygen pipe on the oxygen outlet of the humidification cup;
7. Press the start button of the oxygen supply, the green indicator light is on, and the oxygen generator starts to work;
8. Adjust the flow to the desired position according to the doctor's instructions;
9. According to the oxygen mask or nasal straw packaging instructions, hang the nasal cannula or wear a mask to absorb oxygen.